How does wd 40 work on skateboard bearings

How does wd 40 work on skateboard bearings

WD-40 is a great product that I use to clean and protect my skateboard bearings. It’s not the best thing in the world, but it works. The main reason I use it is that it’s easy to find and doesn’t require any special tools or parts (like other lubes). It’s also very cheap, so if you’re looking to save some money on your skateboarding hobby, this is a good way to go.

Does wd 40 work on skateboard bearings?

Yes. WD-40 is a lubricant and cleaner, so it works on skateboard bearings because it can penetrate into the bearing and clean it, as well as lubricate them. WD-40 is also useful for cleaning other parts of the skateboard because it does not leave behind any residue. It’s safe to use on all parts of your board except for the grip tape, which can be damaged by WD-40.

How to use wd 40 on skateboard bearings?

  • Clean your bearings. If you want to use WD-40 on your skateboard bearings, the first thing you need to do is clean them. This will ensure that the oils in WD-40 have a surface they can bond with and work their magic on.
  • Apply WD-40 directly onto the surfaces of your skateboard bearings (lubricating balls or spacers) or axles where dirt particles may be stuck and prevent smooth spinning movement of wheels across hard surfaces like concrete, asphalt etc., which could lead to uneven wear on wheels causing wobbling effect while riding a skateboard or longboarding; if there is any excess oil after removal then wipe it off with a cloth immediately before riding again as otherwise it might cause premature wear out even before getting used much!

Things to consider while using wd 40 on skateboard bearings

When using wd 40 to lubricate your skateboard bearings, there are a few things to consider.

The first is the type of bearings you have on your skateboard. If they are sealed, then it’s safe to use wd 40 as a lubricant. If they are unsealed, then you should not use wd 40 as it could contaminate them and cause rusting or damage to the actual bearing itself. A better alternative would be an oil that has been specifically designed for skateboarding such as Bones Speed Cream or Bones Bearing Lube Oil which can be found at any skate shop or online retailer like Amazon.

The second thing to consider is how much wd 40 you should use. The best way to do this is by using a cotton swab dipped in some of the wd 40 and dabbing it around the bearings. Once they are sufficiently coated, wipe off any excess with your finger or another clean cotton swab.

The third thing to consider is when to apply your wd 40. If you have just gotten a new set of bearings and they are still dry, then it is best to wait at least 24 hours before applying any kind of lube.

Skateboard bearings are usually sealed, which means that the ball bearings are protected from dirt and water.

If you’re looking to buy skateboard bearings, it’s important to understand the difference between sealed and unsealed bearings.

Sealed bearings, as the name suggests, are protected from dirt and water by a special coating that keeps them clean. Because of this coating, they can be used in any weather conditions without experiencing any damage. However, because of their protection against dust and water damage (and therefore lack of exposure), they can also be more expensive than unsealed versions which don’t have this protection.

When not to use wd 40 on your skateboard bearings

  • Don’t use WD-40 if you have bearings with oil in them. This is pretty obvious, but it’s worth noting that you should only apply a light coating of WD-40 to the bearing, then wipe off any excess. If you don’t do this, your bearings may become too lubricated and start squeaking.
  • Don’t use WD-40 if your bearings are already clean or lubricated. If you’re just buying new skateboard equipment, then obviously these tips won’t apply to you! But if not: never spray or dip your bearings directly into the can—you’ll get way too much lube on them and make them squeak as soon as they dry out again (which could be as soon as tomorrow). Just lightly coat each one with an applicator brush instead, then wipe off any excess by hand before skating again tomorrow.

What can I use instead of WD-40 for bearing cleaning?

WD-40 is a great lubricant for skateboard bearings, but it is not the best option for cleaning them. WD-40 will not clean the dirt and grime from the skateboard bearings. You should use a specific cleaner designed to remove dirt and grime from the bearing. If you want to use WD-40 as a cleaner on your bearings there are three different things you can do:

  • Remove all of the lube that was in place before using any type of spray cleaner or degreaser that’s safe for rolling up bearings.
  • Spray down some WD-40 into an old rag or paper towel, then wipe down each individual component with it until everything has been sprayed down with clean solvent (or whatever method you like). Let dry overnight so parts don’t rust together during storage time (if left wet). Then reassemble with fresh grease!

Alternatives of wd 40 for skateboard bearings cleaning

WD-40 is a lubricant and water displacer. It can be used to clean the outside of your bearings, but not inside. You can find several skateboard bearing cleaners on the market that are specifically designed for this purpose. One such product is Bones Bearings Speed Cream, which is available at most skate shops or online at Amazon.

The following is a list of alternative products that you may consider using:

  • Bones Speed Cream ($6)
  • Bones Bearing Cleaner ($10)

Conclusion

WD-40 is not a lubricant, but it can clean your skateboard bearings. It’s important to know how to use WD-40 on your skateboard bearings so that you don’t damage them. The best way to clean bearings is by using a solvent like acetone or CRC Brake & Parts Cleaner. You can also use mineral oil for lubrication instead of WD-40 if you want something more natural or less expensive than synthetic oils like lithium grease or Teflon Grease.

Leave a Reply

Your email address will not be published. Required fields are marked *