Finding a Skateboard Bike Helmet that stays put through both a kickflip and a bike lane commute is trickier than it sounds, because most lids are certified for one activity and shaped for one riding posture. Parents also end up guessing at sizing while a child’s head keeps growing. That’s the problem this list solves.
Below are nine helmets that manufacturer specs and buyer reviews back up, ranked on fit, ventilation, certification and value. Our top overall pick is the OUWOER Kids Bike Helmet Adjustable Multi-Sport, a three-size kids’ lid with CPSC compliance and a rear dial. The card below has the details.
Comparison Chart of Skateboard Bike Helmet
| Product | Details | Rating | Buy |
|---|---|---|---|
|
Editor’s Choice
|
Kids Bike Helmet Adjustable Multi-Sport from |
★★★★⯪
4.6/5
|
Check on Amazon |
|
Top Pick
|
OutdoorMaster Kelvin Ski Helmet |
★★★★⯪
4.6/5
|
Check on Amazon |
|
Best Budget
|
OutdoorMaster Skateboard Bike Helmet Adult |
★★★★⯪
4.6/5
|
Check on Amazon |
![]() |
80SIX Triple-Certified Multisport Helmet Kids |
★★★★⯪
4.7/5
|
Check on Amazon |
![]() |
Triple Eight Certified Sweatsaver Helmet Skateboarding |
★★★★⯪
4.8/5
|
Check on Amazon |
![]() |
Triple Eight Certified Sweatsaver Helmet Skateboarding |
★★★★⯪
4.8/5
|
Check on Amazon |
![]() |
Skateboard Helmet Impact Resistance Ventilation Youth |
★★★★⯪
4.5/5
|
Check on Amazon |
![]() |
Retrospec Dakota Bike Helmet |
★★★★⯪
4.5/5
|
Check on Amazon |
![]() |
Triple Eight Certified Sweatsaver Helmet Skateboarding |
★★★★⯪
4.8/5
|
Check on Amazon |
List of Top 9 Best Skateboard Bike Helmet
We pulled every helmet here from Amazon listings we could read in full, then compared stated certifications, shell and liner materials, measured head ranges, weights and vent counts. Review volume mattered too: a 4.6 average across 12,945 ratings carries more weight than a 4.8 across 200. Nothing was lab tested, and no one on the team rode in these helmets.
1. Kids Bike Helmet Adjustable Multi-Sport from
The OUWOER is the helmet we’d hand to most families first. It comes in three shell sizes, so a 3 year old and a 13 year old aren’t squeezing into the same moulding, and the rear dial takes up the slack as a head grows.
11 vents
CPSC certified
12.69 oz
Why it made the list
A 4.6 average across 12,945 ratings is unusually steady for a budget kids’ helmet, and the complaints in the reviews are about colour and shipping rather than cracked shells. The manufacturer also states CPSC compliance for riders 5 and older next to the ABS and EPS construction, so there’s a paper trail.
Key specs
- Weight: 12.69 ounces, light enough for a 2 year old to wear without complaint
- Construction: ABS outer shell with an expanded polystyrene foam liner
- Fit system: rear crank dial, two sets of pads in different thicknesses, length adjustable chin straps
- Sizes: small 18.9 to 21.3 in (48 to 54 cm) for ages 2 to 8, medium 21.3 to 22.4 in (54 to 57 cm) for ages 8 to 14, large 22.4 to 24 in (57 to 61 cm) for 14 and up
- Ventilation: 11 top and side vents
- Amazon rating: 4.6 out of 5 from 12,945 reviews
Real-world use
Buyer reports describe this one covering the school run, the scooter trip to the park and the skatepark on the same weekend, which is what a multi-sport helmet is for: a helmet built and certified to handle more than one discipline. Parents mention swapping in the thinner pads once a child’s head grows past the small shell, and kids work the rear dial themselves. Sweat is the usual summer talking point, and the 11 vents move enough air for most riders. If you’re building a full kit, the ZLEIOUY kids helmet and pads set breakdown covers the matching pad options.
- Three shell sizes cover roughly ages 2 to 14, so the fit stays closer than a single adjustable moulding
- CPSC compliance is stated for riders 5 and older, backed by an ABS shell and EPS liner
- A rear dial plus two pad thicknesses let you tune width without buying again
- 12.69 ounces and 11 vents keep it wearable through a warm afternoon
- The small shell stops at 21.3 in (54 cm), so a fast grower may need the medium within a season
- Colour choice is tied to the size you order, so the right fit may not come in the colour your child picked
- ✔ You’re outfitting a child between roughly 2 and 14 and want one shell to last several years
- ✔ Your kid rides a bike, a scooter and a skateboard in the same week
- ✔ You want documented CPSC compliance without moving into the premium bracket
- ✖ The rider’s head measures above 24 in (61 cm), because the largest shell stops there
- ✖ You need a helmet for an adult who skates hard, since this one is sized and padded for kids
2. OutdoorMaster Kelvin Ski Helmet
The Kelvin is the winter outlier here, and it earns a slot because a lot of riders want one helmet budget covering snow days as well as street sessions. It is a snowboard and ski helmet first. Read the certification note below before you assume it covers skatepark use.
22 colours
Rear dial
Washable liner
Why it made the list
At 4.6 out of 5 across 12,036 reviews, the Kelvin is one of the more heavily reviewed snow helmets on Amazon, and the vent count is the feature buyers bring up most. The removable ear pads and washable fleece liner are what separate it from a plain rental lid.
Key specs
- Weight: 0.6 kg (about 21 ounces)
- Construction: reinforced ABS shell over a shock absorbing EPS core
- Ventilation: 14 individual vents
- Fit: size adjustment dial, removable ear pads, washable fleece inner liner
- Dimensions: 8.78 x 7.17 x 10.83 inches
- Colour range: 22 matte combinations
- Amazon rating: 4.6 out of 5 from 12,036 reviews
Real-world use
Buyers describe this as a lift day helmet: warm enough with the ear pads in, and bearable on a sunny spring session once they come out. The dial is easy to work with gloves on, which is the sort of detail that matters at minus temperatures. What it is not is a bike or skate helmet. The listing makes no claim to CPSC or ASTM cycling standards, so treat it as snow gear only and keep a certified skate lid for the street.
- 14 vents give it more airflow than most snow helmets at this price point
- Removable ear pads and a washable fleece liner make end of season cleaning simple
- 22 matte colour options, which is rare for a mid-range snow helmet
- The adjustment dial is workable with gloves on, so you can refit on the lift
- It is built for snow sports, with no bike or skateboard certification listed, so it cannot replace a certified street helmet
- At 0.6 kg it is heavier than the skate lids here, which you notice on a long day
- ✔ You snowboard or ski a few times a year and want your own helmet instead of renting
- ✔ You already own a certified skate or bike lid and want to add a winter one
- ✔ You want a colour that matches a jacket rather than basic black
- ✖ You need one helmet for streets and skateparks, because this one has no cycling or skateboard certification listed
- ✖ You ride somewhere hot, since the fleece liner and ear pads are built for cold air
3. OutdoorMaster Skateboard Bike Helmet Adult
This is the one we’d point an adult at first if money is tight. Two removable liners come in the box, which means the same shell can be shared between two riders or refitted as hair gets longer, and the shell shape suits both a bike and a board.
Dial fit
13.86 oz
XS to XL
Why it made the list
With 22,672 reviews at 4.6 out of 5, this is the most reviewed helmet in this roundup by a wide margin, and the two liner trick is the detail that keeps buyers happy. It also covers the widest size spread here, running from X-Small to X-Large across the variations.
Key specs
- Weight: 13.86 ounces
- Construction: reinforced ABS shell with a thickened shock absorbing EPS core
- Fit: adjustment dial plus adjustable chin strap, two removable liners in different thicknesses
- Sizes: X-Small through X-Large across the colour variations
- Measuring guide: tape around the widest part of the head, about 1 inch above the eyebrows
- Amazon rating: 4.6 out of 5 from 22,672 reviews
Real-world use
Commuters report using this on a hybrid bike during the week and a skateboard at weekends, and the extra liner is the reason it survives both. Washable liners come up often in reviews from riders who sweat heavily, since you can pull one out and rinse it. The chin strap is long enough for most adult head shapes according to buyer reports. The catch is documentation: the listing doesn’t spell out which helmet standards it’s tested to, so if certification is a dealbreaker, ask the seller before ordering. If you’re kitting out a child at the same time, this Wemfg protective gear set breakdown covers pads.
- Two removable liners let two riders share one shell or fine tune the fit
- XS to XL sizing spread, unusually wide for a budget multi-sport helmet
- 22,672 reviews at 4.6 out of 5 gives you a large sample to judge durability from
- 13.86 ounces keeps it comfortable for longer commutes
- The listing doesn’t state which helmet standards it is tested to, which matters if you need certification for a club or a school
- The round multi-sport shell catches wind on fast road descents compared with a road specific shape
- ✔ You switch between a board, a scooter and a commuter bike
- ✔ Two people in the house need one helmet at different times
- ✔ You want the most reviewed option here without paying mid-range money
- ✖ A printed certification label is a requirement for your club or school
- ✖ You want a plush, sweat absorbing liner, since these pads are thinner than a Sweatsaver
4. 80SIX Triple-Certified Multisport Helmet Kids
If you want the certification paperwork to be the headline, start here. The 80SIX is built by Triple Eight and lists three separate standards on the box, which is more than most kids’ helmets at this price can show.
400 g
3 sizes
Removable pads
Why it made the list
The 4.7 out of 5 across 4,829 reviews is the highest average among the kids’ helmets here, and the certification list is the longest: CPSC for bicycle helmets age 5 and older, ASTM F1447 for recreational cycling and roller skating, and ASTM F1492 for skateboarding. That combination is why it’s our pick for families who want one helmet to cover everything.
Key specs
- Weight: 400 g (about 14 ounces)
- Construction: ABS outer shell with an EPS liner and inner foam pads
- Certifications: CPSC bicycle standard, ASTM F1447, ASTM F1492
- Sizes: 5+ youth 49 to 52 cm, 8+ youth 52 to 56 cm, 14+ small/medium 55 to 58 cm
- Ventilation: vented classic shell shape
- Amazon rating: 4.7 out of 5 from 4,829 reviews
Real-world use
Buyers report this working for skateboarding, scooters, hoverboards and balance bikes inside the same month, which is exactly the multi-sport brief. The helmet is designed to fit snug from day one and the foam pads gradually mould to the head, and several reviews mention that break-in period as a surprise on the first ride. Parents of 5 to 7 year olds describe the 5+ youth shell as a good match, while families with a taller 12 year old tend to need the 14+ size. If you’re comparing kids’ lids more broadly, this JeeFree kids helmet review covers another budget option.
- Three certifications (CPSC, ASTM F1447 and ASTM F1492) cover cycling, skating and skateboarding in one helmet
- 4.7 out of 5 from 4,829 reviews, the strongest average among the kids’ picks here
- 400 g is light enough for a 5 year old to keep on for a full session
- Sized steps at 5+, 8+ and 14+ mean fewer riders stuck between shells
- The pads are snug when new and take a few hours of wear to break in, so don’t size up to fix a tight first fit
- No dial retention, only foam pads and straps, which means less adjustment as a head grows
- ✔ You want the certification labels spelled out clearly for school or club rules
- ✔ Your child skates, scoots and bikes in the same week
- ✔ You’d rather buy a snug classic shell than a dial adjusted one
- ✖ Your child is between the 5+ and 8+ shell sizes, since pads alone won’t close a large gap
- ✖ You want a dial to take up growth through a school year
5. Triple Eight Certified Sweatsaver Helmet Skateboarding
The Sweatsaver is the helmet skateboarders actually recognise, and the terry cloth liner is the reason. It soaks up sweat instead of letting it run into your eyes, and the whole liner pulls out to wash.
4 sizes
Extra pads
Triple certified
Why it made the list
This is the highest rated helmet in the roundup at 4.8 out of 5 from 9,618 reviews, and it is the only one here with a moisture wicking Sweatsaver liner, which is a fabric layer that pulls sweat away from the forehead. Two sets of pads ship in the box, so you can size the fit without ordering parts.
Key specs
- Weight: 0.5 kg (about 17.6 ounces)
- Construction: high impact absorbing EPS foam with dual density soft foam and Sweatsaver fabric
- Certifications: CPSC bicycle standard, ASTM F1447 for recreational cycling and roller skating, ASTM F1492 for skateboarding
- Sizes: XS/S 51 to 54 cm, S/M 53 to 57 cm, L/XL 57 to 60 cm, XL/XXL 60 to 63 cm
- Fit: two sets of Sweatsaver pads included, no dial
- Amazon rating: 4.8 out of 5 from 9,618 reviews
Real-world use
Reviews from skateboarders and BMX riders describe this as a helmet you forget about after ten minutes, and the sweat handling is mentioned in almost every long term review. The pads are tight when new and loosen after a couple of hours of wear, so buyers who sized up to fix a snug first fit often end up with a helmet that rolls. It suits skatepark sessions, roller derby practice and pump tracks. For a full protective kit alongside it, see this BOSONER kids’ protective gear set review.
- 4.8 out of 5 from 9,618 reviews, the highest average in this roundup
- Sweatsaver terry liner absorbs sweat and pulls out for washing
- Triple certified to CPSC, ASTM F1447 and ASTM F1492
- Two pad sets included, so you can tune the fit without buying extras
- Pads feel very tight when new and break in over a few hours, so sizing up to fix that backfires
- No dial retention, so fit is set entirely by which pads you install
- ✔ You skate or ride BMX and sweat a lot in a helmet
- ✔ You want one helmet that also passes the bike standard
- ✔ You know your head measurement and fall cleanly inside one size
- ✖ You want a dial to loosen the helmet quickly between riders
- ✖ Your measurement sits between two of the four sizes, because pad swaps alone may not fix it
6. Triple Eight Certified Sweatsaver Helmet Skateboarding
Same Sweatsaver build, different finish. This is the Sunset colourway in the larger shell, and it exists on this list because colour is a real buying factor for kids and teenagers who refuse to wear a plain black lid.
Large to XXL
Triple certified
0.64 kg
Why it made the list
It carries the same 4.8 out of 5 across 9,618 reviews as the black version, since the reviews pool across colourways, and it is the largest shell in the Sweatsaver range at 60 to 63 cm. That makes it the answer for adults who tried a smaller Sweatsaver and found it tight.
Key specs
- Weight: 0.64 kg (about 22.6 ounces)
- Construction: EPS foam with dual density soft foam and Sweatsaver moisture wicking fabric
- Certifications: CPSC bicycle standard, ASTM F1447, ASTM F1492
- Sizes: XS/S 51 to 54 cm, S/M 53 to 57 cm, L/XL 57 to 60 cm, XL/XXL 60 to 63 cm
- Fit: two sets of Sweatsaver pads included, no dial
- Amazon rating: 4.8 out of 5 from 9,618 reviews
Real-world use
Buyers with larger heads (around 60 cm and up) report this as one of the few skate style helmets that actually fits without pressure points at the temples. The 0.64 kg weight is the trade off, and longer sessions in summer heat are where riders notice it most. Teenagers who rejected a black helmet tend to accept this one, which in practice is what keeps a helmet on a head. Sizing should come from a soft tape measure around the widest point of the head, not from a hat size.
- Reaches 63 cm, so it covers riders the other skate helmets here leave out
- Same triple certification and Sweatsaver liner as the black version
- A distinct Sunset finish that older kids will actually wear
- Two pad sets in the box for fine tuning
- At 0.64 kg it is the heaviest helmet here, and you feel it on long summer sessions
- Colour specific listings sell out faster than black, so restock gaps happen
- ✔ Your head measures between 60 and 63 cm
- ✔ A teenager in the house refuses to wear a plain helmet
- ✔ You still want the Sweatsaver liner and triple certification
- ✖ You’re below 60 cm, because a smaller Sweatsaver size fits better
- ✖ Weight is your first concern, since lighter options exist at 400 g
7. Skateboard Helmet Impact Resistance Ventilation Youth
The Tourdarson is the lightest helmet on this list at 350 g, and it leans on ventilation more than padding. It’s a sensible first helmet for a teenager who rides a scooter to school and a board at weekends.
11 vents
3 sizes
Budget
Why it made the list
At 350 g it is the lightest helmet here by a clear margin, and 11 vents give it airflow that suits hot climates. The 4.5 out of 5 across 2,826 reviews is a smaller sample than the leaders, but the pattern is consistent: buyers rate the weight and the price.
Key specs
- Weight: 350 g (about 12.3 ounces)
- Construction: reinforced ABS shell with a thickened shock absorbing EPS core
- Ventilation: 11 vents with an aerodynamic channel layout
- Sizes: small 17.71 to 19.29 in (45 to 49 cm), medium 20.04 to 22.04 in (51 to 56 cm), large 21.25 to 23.62 in (54 to 60 cm)
- Fit: adjustable chin strap
- Amazon rating: 4.5 out of 5 from 2,826 reviews
Real-world use
Buyers describe this as a helmet for long, sweaty sessions: the vent layout pushes air through rather than just letting heat sit, and the light shell stops the neck ache that heavier lids cause on a scooter. The size chart needs attention though, because the small stops at 49 cm and the medium starts at 51 cm, leaving a gap for riders in between. The listing also doesn’t name the safety standards it meets, which is worth knowing if a school or club asks.
- 350 g is the lightest build here, which matters on long scooter or board sessions
- 11 vents with an aerodynamic layout keep airflow moving in warm weather
- Budget tier pricing without dropping to a single shell size
- Large shell reaches 60 cm, so it fits a fair range of adults
- The size chart leaves a gap between 49 cm and 51 cm, so some riders fall between shells
- The listing doesn’t name the helmet standards it is tested to, which matters for school or club rules
- Fit relies on the chin strap alone, with no rear dial for fine tuning
- ✔ You ride somewhere hot and sweat is your main complaint
- ✔ You want the lightest helmet you can get on a tight budget
- ✔ Your head measurement lands squarely inside one of the three sizes
- ✖ You measure between 49 cm and 51 cm, where neither small nor medium fits well
- ✖ You need a printed certification label for organised sport
8. Retrospec Dakota Bike Helmet
The Dakota is a bike helmet first, which is exactly why it suits riders who commute more than they kickflip. It’s sold in three adult sizes, the padding pulls out for washing, and the shape is a clean round skate profile rather than a teardrop road shell.
16 oz
Washable pads
3 sizes
Why it made the list
A 4.5 out of 5 from 8,565 reviews puts it among the more established adult multi-sport helmets, and the removable, moisture wicking padding is a practical touch that most budget helmets skip. It’s positioned for BMX, scooters, longboards and e-bike style commuting rather than pure skatepark abuse.
Key specs
- Weight: 16 ounces
- Construction: ABS shell with shock absorbing EPS foam
- Ventilation: 10 vents with 360 degree airflow routing
- Sizes: small 51 to 54 cm, medium 54 to 57 cm, large 57 to 60 cm
- Padding: removable and washable moisture wicking interior
- Amazon rating: 4.5 out of 5 from 8,565 reviews
Real-world use
Buyers use this mainly for commuting and cruising: bike lanes, e-bike style trips and longboard pushes along flat ground. The washable padding comes up repeatedly from riders who use it daily, because a helmet that smells is a helmet that gets left at home. The 10 vents are fewer than the 14 on a snow helmet or the 11 on the Tourdarson, and that shows up on slow, hot climbs. It’s a solid urban lid, not a downhill or skatepark specialist.
- Removable, washable padding that wicks moisture, which keeps a daily commuter helmet usable
- Three adult sizes from 51 to 60 cm rather than one adjust to fit shell
- Round skate profile looks right on a scooter or longboard as well as a bike
- 8,565 reviews at 4.5 out of 5, so durability feedback is easy to check
- Only 10 vents, so it gets warm on slow climbs and stop start city riding
- 16 ounces is heavier than the 12.3 ounce Tourdarson, which you notice over a long session
- The listing leans on cycling, so check the label if you need an explicit skateboard certification
- ✔ You commute by bike or e-bike and want a skate style shell
- ✔ You wash your helmet padding regularly and want it removable
- ✔ Your head sits between 51 and 60 cm and you want a proper size step
- ✖ You spend summers in a hot skatepark, where 10 vents won’t be enough
- ✖ You need an explicitly skateboard certified helmet rather than a cycling focused one
9. Triple Eight Certified Sweatsaver Helmet Skateboarding
This is the black matte Sweatsaver in the standard weight shell, and it’s the version most buyers end up with. If you want the classic skate look and the full certification list without paying for a special finish, this is the straightforward buy.
0.5 kg
4 sizes
Triple certified
Why it made the list
It shares the 4.8 out of 5 from 9,618 reviews with the rest of the Sweatsaver line, and at 0.5 kg it is lighter than the large Sunset shell. The dual density foam and the moisture wicking liner are the two features buyers name when they explain why they replaced a cheaper helmet.
Key specs
- Weight: 0.5 kg (about 17.6 ounces)
- Construction: EPS foam, dual density soft foam and Sweatsaver moisture wicking fabric
- Certifications: CPSC bicycle standard, ASTM F1447 for cycling and roller skating, ASTM F1492 for skateboarding
- Sizes: XS/S 51 to 54 cm, S/M 53 to 57 cm, L/XL 57 to 60 cm, XL/XXL 60 to 63 cm
- Fit: two sets of Sweatsaver pads included
- Amazon rating: 4.8 out of 5 from 9,618 reviews
Real-world use
Skateboarders and roller derby players describe this as the helmet they keep coming back to, largely because the liner handles sweat and the shell survives repeated knocks without the straps fraying. It also passes the bike standard, so the ride to the park doesn’t need a second helmet. As with the other Sweatsaver shells, the new pads feel tight and settle after a couple of hours, so order by measurement rather than by feel straight out of the box.
- Triple certified, so it satisfies bike and skateboard standards in one purchase
- 4.8 out of 5 from 9,618 reviews and a liner buyers single out for sweat control
- 0.5 kg, lighter than the large Sunset shell in the same range
- Two pad sets included to dial in the fit
- New pads feel tight for the first few hours, so buying a size up to compensate leads to a loose helmet
- No dial retention, which means refitting between two riders takes longer than a twist
- ✔ You want one helmet for skateboarding, BMX and the bike ride over
- ✔ You skate hard enough to sweat through a session
- ✔ You’re between 51 and 60 cm and want the standard shell weight
- ✖ You share a helmet between riders of different sizes and want a dial
- ✖ You’re above 60 cm, in which case the XL/XXL Sunset shell is the fit
How we chose
We started with Amazon listings we could read end to end, then narrowed to helmets that appear in both skateboard and bike categories rather than sitting in one lane. Nine made the cut out of a longer shortlist, and the filter was mostly about documentation: helmets whose listings name the standards they meet, state a measured head range in both centimetres and inches, and give a weight in ounces or grams.
Four things decided the order. First, certification coverage, since a helmet that meets CPSC plus ASTM F1447 plus ASTM F1492 is doing more work than one that names a single standard. Second, adjustability, where a rear retention dial scores over pad only systems for growing kids and shared helmets. Third, weight and vent count, which we treated as comfort proxies rather than performance claims. Fourth, review depth, because a 4.5 average across 8,565 ratings tells you more about real durability than a 5.0 across 90.
The numbers in this article come from the listings as retrieved in 2026. We did not price check day to day, which is why you’ll see budget, mid-range and premium labels in the prose rather than figures.
What we did not cover: no one on the research team rode in these helmets, so every ride report here is drawn from what buyers wrote. We excluded full face helmets, MIPS equipped models, children’s helmets under 45 cm, and anything without a verifiable size chart. We also left out helmets where the listing did not state a head circumference range at all, since fit is the one thing a buyer cannot work around. If you’re assembling a full protective kit rather than just a helmet, our CELOID kids bike helmet and pad set guide covers pads alongside lids.
Buying guide: what matters for Skateboard Bike Helmet
What does multi-sport certification actually mean?
A multi-sport helmet is a helmet tested against more than one safety standard, usually two or three, which matters when you switch between a board and a bike during the same week. In the US the baseline is the CPSC standard for bicycle helmets for persons age 5 and older. Skateboard specific testing comes from ASTM F1492, and recreational cycling and roller skating fall under ASTM F1447. A helmet that names all three is your safest bet for a rider who changes activity often.
Not every listing spells this out, and that’s not automatically a red flag, but it does mean you should ask before buying if a school, club or race requires a label. The 80SIX and the Triple Eight Sweatsaver helmets both publish three standards. A few budget options here publish none, which we’ve flagged in the drawback section for each.
How do you get the fit right?
Measure first, order second. Run a soft tape around the widest part of the head, roughly one inch above the eyebrows, and keep the tape level. That measurement in centimetres is the number to match against the size chart, not age and not hat size. A helmet should sit level with the front edge just above the eyebrows and should not rock forward when you push it. If it slides back far enough to expose the forehead, it’s too loose.
Retention systems split into two camps. A rear dial, sometimes called an occipital cradle, tightens the shell around the back of the head and is the friendlier option for kids who grow a size a year. Pad only systems, which is what the Sweatsaver range uses, rely on swapping foam pads and give a tighter, more locked-in feel once set. Both work, but a dial is easier to adjust between two riders.
Does vent count really change comfort?
Ventilation matters more for skateboarding than most people expect, because a skate session is stop start rather than a steady 15 mph airflow. A skate helmet usually has 10 to 11 vents, while a snow helmet like the Kelvin runs to 14 and a road bike helmet often exceeds 20. Vents only move air when you move, so a low vent count shows up most when you’re standing around a skatepark in July. Weight compounds it: a 350 g shell is noticeably easier on the neck than a 0.64 kg one after two hours.
What should you look for in shell and liner materials?
Almost every helmet here uses the same two layer recipe. ABS is a hard plastic outer shell that spreads an impact across a wider area, and EPS, or expanded polystyrene, is the foam liner that crushes to absorb energy. A dual density liner adds a softer inner layer for low speed knocks. The Sweatsaver range layers a moisture wicking fabric over that foam, which is a comfort feature rather than a safety one, but a helmet you’re willing to keep on is a safer helmet in practice.
When should you replace a skateboard bike helmet?
Replace a helmet after any significant impact, even if the shell looks fine, because EPS foam compresses once and does not spring back. A helmet that has been dropped hard onto concrete from waist height has done its job and should be retired. Beyond impacts, follow the manufacturer’s stated service life, check the straps and buckles for fraying each season, and replace any helmet a child has outgrown rather than padding it out with socks. A snug fit is the safety feature.
Frequently asked questions
Can you use a bike helmet for skateboarding?
Yes, if it carries the skateboard standard as well as the bike one. A helmet certified to CPSC and ASTM F1492 covers both, which is what the 80SIX and both Sweatsaver helmets here do. A bike only helmet will protect your head in a fall, but it is shaped and tested for a different kind of impact, and skate style helmets also sit lower at the back of the head, where skate falls tend to land.
What is the best helmet for skateboarding and biking?
For most families, the OUWOER Kids Bike Helmet Adjustable Multi-Sport is the best balance of fit range, CPSC compliance and price. For adults who skate seriously, the Triple Eight Sweatsaver is the stronger pick thanks to triple certification and the sweat absorbing liner. If certification breadth is your priority and the rider is a child, the 80SIX covers three standards for less than the Sweatsaver.
Are Triple Eight helmets good for biking?
The Sweatsaver line is triple certified, including the CPSC bicycle standard and ASTM F1447 for recreational cycling and roller skating, so yes, they meet the bike requirement as well as the skateboard one. The trade off is ventilation: a Sweatsaver has a round skate profile with limited vents, so it runs warmer than a road helmet on a long summer commute.
What helmet should a kid wear for skateboarding and biking?
Look for three things: a measured head range that matches your child, a certification list that includes both the CPSC bike standard and ASTM F1492, and a retention system your child can operate. A dial is easier for a 6 year old than swapping foam pads. Sizes change roughly every 12 to 18 months in primary school years, so check the fit each season rather than assuming last summer’s helmet still works.
How do I choose the right size skateboard bike helmet?
Measure the head circumference about one inch above the eyebrows with a soft tape, then match that number to the size chart in centimetres. Don’t buy by age, because a 10 year old can sit in either the 8+ or the 14+ shell depending on build. If the measurement lands between two sizes, take the smaller shell when it has a dial and the larger shell when it relies on pads, since pads can only take up so much slack.
Is a ski helmet safe for skateboarding?
No, not as a substitute for a certified skate or bike helmet. A ski helmet like the OutdoorMaster Kelvin is built for snow sports, and its listing does not claim CPSC or ASTM cycling and skateboard standards. It will cushion a fall, but it has no documented certification for street or skatepark use, and the fleece liner and ear pads are designed for cold weather rather than a warm afternoon.
Final verdict
The OUWOER Kids Bike Helmet Adjustable Multi-Sport takes the top spot for families, because three shell sizes, a rear dial and stated CPSC compliance cover the widest range of young riders without stretching the budget. For adults who skate more than they commute, the Triple Eight Sweatsaver is the runner-up and the better long term buy: triple certification, a liner that handles sweat, and a 4.8 average across 9,618 reviews.
Affiliate disclosure: This article contains affiliate links. If you buy through them we may earn a commission at no extra cost to you. It does not change which products we recommend.








